iPonic 600 Environmental Controller

A Revolution in Grow Room Controllers
Take control of your grow room with the new iPonic 600 Controller from Link4. Developed for the commercial greenhouse industry, the iPonic 600 represents a revolution in grow room controllers. Now you can operate every aspect of your garden from one intelligent and fully programmable controller.

The All-In-One Grow Room Controller
The iPonic does it all – Fuzzy Logic CO2, Light Timer, Temperature, Humidity, Recycle Timers, Vent Fans, High Temperature Shut-off, Central air conditioning and heating – even add your own custom devices. This is the only controller you will need. The iPonic 600 grows and changes as your grow room changes.

Fully Programmable and Flexible
Unlike most controllers on the market, the iPonic controller allows total flexibility using software based intelligence. This means that you can program all functions together and eliminate multiple controllers for multiple functions – the iPonic does it all. This also means that you can change devices on the fly – add or delete devices to match the equipment in your garden in minutes. Includes 8 120 volt outlets – 6 fully programmable for combination of devices, can also be used to control central a/c or heaters or any device with a remote thermostat connection.

Large Touch Screen Display
The large backlit display instantly shows you the status of all devices and settings. The simple touch control buttons makes checking and changing settings simple.

Fully Automated Control of the Entire Growth Cycle
The iPonic 600 allows you to control each device individually with manual settings or fully automatically with all devices working together. Entire growth cycle settings can be programmed and saved on the removable USB thumb drive. This allows you to run custom growth cycles with programmed settings for every device on a week by week basis. These programs can be saved and even shared with other growers.

Remote Communications and Control
With the optional communications module, the iPonic 600 controller can be monitored and controlled by a smart phone, PC or other Internet device – from anywhere in the world.

The iPonic does it all – Fuzzy Logic CO2, Light Timer, Temperature, Humidity, Recycle Timers, Vent Fans, High Temperature Shut-off, Central air conditioning and heating – even add your own custom devices. This is the only controller you will need. The iPonic 600 grows and changes as your grow room changes.

8 – 120 Volt power outlets (6 programmable)
15 Amp input with resettable breaker
Integrated remote sensor for CO2, temperature, humidity, and light with 16 foot cord
Large back-lit touch screen display
Removable USB thumb drive for data storage and automatic growth schedules
6 factory default plug settings – CO2 device, light timer, recycle timer, humidity device, heating device, and ventilation
2 connections for central air conditioning and heating thermostats
U.L. and C.U.L. approved

CO2 Monitor & Controller
Fuzzy logic CO2 monitor & controller
Self-calibrating PPM monitor
CO2 exhaust fan shut off
120 Volt plug for CO2 regulator or generato
Separate day and night settings
Fully programmable for varied settings week by week

Environmental Controller
Independent heater and cooling device control
Independent humidifier and dehumidifier control
Independent central heating and air conditioning control
Independent ventilation fan control
Fully programmable for varied settings week by week
Day and night settings
Integrated control with CO2 device

Digital Light Timer
Controls an unlimited number of lights with the use of separate light control relay with trigger cable
Controls multiple light banks
Integrated high temperature shut off
Integrated hot bulb restart delay
Fully programmable for varied settings week by week

Digital Recycle Timer
Set time on & time off down to the second
Controls multiple devices on separate schedules
Day/night settings
Fully programmable for varied settings week by week

Data Logging
Removable USB thumb drive
Data log to internal memory
Data log to removable USB
Graph data on controller
Min/Max last 24 hours
Min/Max since reset – CO2, temperature, and humidity
Customizable growth schedule
Veg & bloom pre-programmed growth schedule

Communications
Optional communications module
iPonic cloud for remote monitoring and control
Email & SMS text notification
PC software
Smart phone apps
Automatic notifications via text message

Support
Three year warranty
Toll-free tech support
Online support and instruction videos

4,780 total views